Display assembly
Description
11.6-inch, AG, SVA, LED TouchScreen display assembly (includes webcamera/microphone
module and wireless antenna cables)
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the display assembly:
1.
Remove the rear rubber feet (1).
The rear rubber feet are included in the Rubber Feet Kit, spare part number 730888-001.
2.
Remove the two Phillips PM2.2×5.5 screws (2) that secure the rear corner covers to the computer.
Battery on page
27).
Service cover on page
28).
Component replacement procedures
Spare part number
730892-001
37