Power Button Board - HP Pavilion dv7-4100 - Entertainment Notebook PC Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the hard drive (see
7. Remove the secondary hard drive (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the top cover (see
Remove the power button board:
1. Turn the top cover upside down with the front toward you.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the power button board to the top
cover.
66 Chapter 4 Removal and replacement procedures
Battery on page 46).
Primary hard drive cover on page
Hard drive on page
Secondary hard drive on page
Optical drive on page
Keyboard on page 60).
Top cover on page 62).
47).
48).
50).
58).
Spare part number
605358-001
ENWW