Installation On A Windows Pc - FujiFilm FinePix BL00710-201(1) Owner's Manual

Fujifilm digital camera owner's manual
Table of Contents

Advertisement

Installation on a Windows PC

Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Requirement
Windows 98 SE
Windows Millennium Edition (Windows Me)
Operating
Windows 2000 Professional
1
System
Windows XP Home Edition
*
Windows XP Professional
Windows Vista
200 MHz Pentium minimum
CPU
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
RAM
128 MB minimum (512 MB minimum for Windows Vista)
Hard disk
Amount required for installation: 450 MB minimum
space
Amount required for operation: 600 MB minimum
Display
800 × 600 pixels or better, 16-bit color or better
1
*
Models with one of the above operating systems pre-installed.
2
*
When you install the software, login using a system administrator account (e.g. "Administrator").
CAUTION
• Note that the software to be installed is different depending on the OS. (Windows 98SE/Me: FinePixViewer, Windows 2000/XP/
Vista: FinePixViewer S)
• Additional USB interface board is not guaranteed.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
92
92
2
*
2
*
2
*
2
*
Recommendation
Windows XP
Windows Vista
2 GHz Pentium 4 or
3 GHz Pentium 4 or
better
better
512 MB or better
1 GB or better
2 GB or better
15 GB or better
1024 × 768 pixels or better, Highest (32 bit)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Finepix j10Finepix j11

Table of Contents