Table of Contents
Advertisement
Matters
Problems
Cannot use the
flash.
Flash
The flash settings
are restricted and
cannot be
selected.
The playback
image is dark
even though the
flash was used.
The image is
blurred.
Photographed
images
There is speckling
on the image.
Possible causes
The shutter button was pressed while the
flash was charging.
The Shooting mode is set to
,
, or
.
The batteries have run out.
The flash is set to [C SUPPRESSED
FLASH] mode.
The Shooting mode is set to AUTO,
, ,, ., 8,
,
,
,
,
or
.
The subject is too far away.
Your finger was covering the flash.
The lens is dirty.
{ appeared when taking pictures.
| appeared when taking pictures.
The picture was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.
Solutions
Wait until the charging is completed
before pressing the shutter button.
, ,,
,
Change the Shooting mode.
Load fully charged batteries.
Set to another flash mode excluding the
[C SUPPRESSED FLASH] mode.
,
The flash settings are restricted because
,
,
,
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
Move to within the effective flash range
before taking the picture.
Hold the camera correctly.
Clean the lens.
Check the focus on the subject and take
pictures.
It may cause camera shake. Hold the
camera steadily.
This is a characteristic of CCDs and does
not indicate a camera fault.
Page
49
41
12, 22
48
41, 49
47, 49
25
–
26, 29,
107
27, 107
–
Continued Q
113
Advertisement
Table of Contents
