Table of Contents
Advertisement
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
The batteries are low or completely out of charge.
V (Blinking red)
|
There is a strong likelihood of camera shake
because the shutter speed is slow.
The AF (autofocus) cannot work effectively.
{
The camera cannot shoot the picture at the correct
}
brightness due to too bright or dark shooting
condition.
Camera malfunction or fault.
[FOCUS ERROR]
[ZOOM ERROR]
Memory Card is not inserted when transferring
[NO CARD]
images.
• The Memory Card or internal memory is not
• The Memory Card was formatted on a PC.
[CARD NOT
• The Memory Card contact area is soiled.
INITIALIZED]
• Camera fault.
Explanation
formatted.
Remedy
Load new or fully charged batteries.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.29).
• Select Macro mode when taking close-up shots.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
Insert a Memory Card.
• Format the Memory Card or internal memory on
the camera (➝p.84).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.84). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
Continued Q
107
Advertisement
Table of Contents
