Table of Contents
Advertisement
Specifications
Power Supply and Others
Guide to the number of
available frames for battery
operation
Camera dimensions
(W/H/D)
Camera mass (weight)
Weight for photography
Operating Conditions
120
Battery Type
NP-45
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be
xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery,
the figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
91.0 mm × 55.0 mm × 22.0 mm/3.6 in. × 2.2 in. × 0.9 in. (not including accessories and attachments)
Approx. 110 g/3.9 oz. (not including accessories, battery and Memory Card)
Approx. 126.5 g/4.5 oz. (including battery and Memory Card)
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Number of frames
Approx. 150 frames
Advertisement
Table of Contents
