HP OmniBook xe3-gf - Notebook PC Startup Manual page 33

CAUTION
Make a habit of saving your work before allowing your computer to go into
standby mode. If power is interrupted while the computer is in standby mode,
information that has not been saved will be lost.
Hibernate mode
Action Saves the current session to disk, then
shuts down. Provides maximum power
savings while still allowing you to recover
the current session. Restores network
connections.
When Click Start, Shut Down, Hibernate
(Windows 2000).
-OR-
Click Start, Turn Off Computer, then press
and hold Shift and click Hibernate
(Windows XP).
-OR-
Configure lid, power switch, or standby
button to perform the hibernation action.
Then close lid or press button (see "To set
power management properties," above).
Resume Press the blue standby button to recover
your current session. This may take several
minutes.
The computer also enters hibernate mode automatically when battery power reaches a
critically low level—see "To respond to a low-battery warning" on page 36. In Windows
98, hibernate mode occurs automatically with critical low battery power only; and
manual initiation of hibernate is not available by default (except, if you wish, you can
modify the default setting for the power switch or the standby button to manually initiate
hibernate mode instead).
Traveling with Your Computer
Managing Power Consumption
Startup Guide 33