Configuring The Computer; To Run The Bios Setup Utility - HP OmniBook 510 - Notebook PC Reference Manual

Configuring the Computer

Your computer includes two tools that help you configure its operation: the BIOS Setup
utility and HP TopTools.

To run the BIOS Setup utility

The BIOS (Basic Input and Output System) Setup utility enables you to make changes to
the computer's system configuration, and to tailor the operation of your computer to your
individual work needs.
The settings made in BIOS Setup generally control the computer's hardware, and so
greatly affect how the computer operates.
1. Click Start, Shut Down (or Turn Off Computer), Restart.
2. When the HP logo appears, press F2 to enter BIOS Setup.
3. The pointing devices are not active in BIOS Setup, so you will need to use the
keyboard to navigate:
• Press the LEFT and RIGHT arrow keys to move among menus.
• Press the UP and DOWN arrow keys to move among parameters in a menu.
• Press F5 or F6 to move through values for the current parameter, or press ENTER
to change a setting.
4. After you select the options you want, press F10 or use the Exit menu to exit BIOS
Setup.
5. If the settings cause a conflict between devices during reboot, the system prompts you
to run BIOS Setup, and marks the conflicting settings.
The following tables describe the settings for the BIOS version at publication. If your
BIOS version is different, some settings may differ from those shown or may be absent.
Also, the computer and expansion base may have different BIOS versions.
Troubleshooting and Maintenance
Configuring the Computer
Reference Guide 131