Press and hold <Fn> and <Esc>, and then plug the AC adapter.
3.
Figure 2:36. Hold Down <Fn> + <Esc> and plug the AC Adapter
Press the Power button to start the Crisis Utility.
4.
NOTE:
If the Crisis Utility does not starts after 5 minutes, this indicates that the system recovery is
failed.
Do the following:
Make sure the USB crisis disk file name is correct.
1.
Unplug the AC adapter, then remove and install again battery to reset the embedded
2.
status.
Retry step 1~4.
3.
System Utilities
Figure 2:37. Press the Power Button
2-26