Perform the following:
5.
Route the auxillary antenna cable (A, white) by the white line on the left side of the
a.
mainboard until it pass through the mainboard hole (C).
Route the main antenna cable (B, black) through the guides and by the white line on the
b.
right side of the mainboard until it pass through the mainboard hole (D).
Attach the adhesive tapes to fix the antenna cables on the respective white lines.
c.
On the underside of the lower case, continue to route the antenna cables.
6.
Perform step 3 of the
7.
Service and Maintenance
A
C
Figure 5:128. Routing the WLAN Antenna Cables
Figure 5:129. Connecting the WLAN Antenna Cables
WLAN Module Installation
D
on page 5-28.
B
5-83