Table of Contents
Advertisement
Main
The Main tab allows the user to set the system time and date, enable or disable boot option, and
enable or disable recovery.
Information
Main
System Time :
System Date :
Total Memory:
Video Memory:
Graphic mode
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
F1
Help
Esc
Exit
Parameter
System Time
System Date
Total Memory
Video Memory
Graphic Mode
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
2-5
InsydeH20 Setup Utility
Security
Boot
[19:03:49]
[01/01/2012]
6144MB
128MB
[Switchable]
[Enable]
[Enable]
[Disable]
[Enable]
[AHCI Mode]
Select Item
F5/F6
Select Menu
Enter
Figure 2:2. BIOS Main
Sets the system time in 24-hour format.
Sets the system date.
Displays the total memory installed.
Displays the video memory installed.
Select the graphic mode: Integrated or Switchable.
When enabled, displays the OEM (original equipment
manufacturer) screen during system boot instead of the traditional
POST screen.
Enable or disable system boot from LAN (local area network).
Enable or disable the use of boot menu during POST.
Enable or disable disc-to-disc recovery by pressing Alt+F10 key
during POST.
Select the SATA controller mode: AHCI or IDE.
Exit
Change Values
Select
Sub-Menu
Description
Item Specific Help
This is the help for the hour, minute,
second field. Valid range is from 0 to
23, 0 to 59 . INCREASE/REDUCE : F6
/F5 .
F9
Setup Defaults
F10
Save and Exit
System Utilities
Rev. 3.7
Advertisement
Table of Contents
