HP F2974KT - OmniBook 500 - PIII 700 MHz Manual page 191

Setting
Unique Dock ID
UUID
* Available only when docked.
System Devices Menu
Setting
PS/2 Pointing Devices
External Fn Key
FDD Controller
Legacy USB Support
Serial port
Base I/O address
Infrared port
Mode
Base I/O address
DMA channel
Parallel Port
Mode
Base I/O address
DMA channel
Description
Sets whether the computer creates a unique hardware profile
for each expansion base (Enabled) or uses a common profile
for all expansion bases (Disabled).
Displays the value of the 16-byte UUID (Universally Unique
ID) as 32 hex characters.
Description
Automatically disables the internal pointing devices when an
external PS/2 mouse is connected.
Sets whether left CTRL+left ALT on an external keyboard is
interpreted as the Fn key.
Enables the floppy drive.
Enables BIOS support for USB mouse, keyboard, and floppy
disk drive.
Enables the serial port (the port is configured by the user).
Sets the I/O address and interrupt (appears only if the serial
port is Enabled).
Enables the infrared port (the port is configured by the user).
Sets the port to FIR (fast IR) or SIR (standard IR) infrared
communications.
Sets the I/O address and interrupt.
Sets the DMA channel for the infrared port in FIR mode.
Enables the parallel port (the port is configured by the user).
Sets the port to output only, bi-directional, ECP, or EPP.
Sets the I/O address and interrupt.
Sets the DMA channel for ECP mode (appears only if the
parallel port Mode is ECP).
Troubleshooting and Maintenance
Configuring the Computer
Default
Enabled
Detected
automatically
Default
Auto
Enabled
Enabled
Enabled
Enabled
3F8h, IRQ4
Disabled
FIR
2F8h, IRQ3
DMA1
Enabled
ECP
378h, IRQ7
DMA0
Corporate Evaluator's Guide 191