HP F2974KT - OmniBook 500 - PIII 700 MHz Manual page 156

Using Windows NT 4.0
Installing Retail Windows NT 4.0
Driver installation with no networking installed
Make sure you have copied the \I386 directory from the Windows NT 4.0 CD-ROM to
your local hard-drive. If not, do it by NOW!
Follow these steps to install the 3Com 10/100 Mini PCI Ethernet Adapter driver when
networking has not been installed:
1. In the Control Panel, double-click Network.
2. When the system prompts: "Windows NT Networking is not installed. Do you want
to install it now?", click Yes. This opens the Network Setup Wizard.
3. Check "Wired to the network", and then click Next.
4. When the system prompts to have setup start searching for a network adapter, click
"Select from list".
5. Click Have Disk. Enter the directory which contains the LAN drivers (LAN
subdirectory), and then click OK.
6. When the "Select OEM Option" window opens, select 3Com 10/100 Mini PCI
Ethernet Adapter, and then click OK.
7. The Network Adapters list shows a check mark next to the 3Com network adapter.
Click Next to continue.
8. In the Network Protocols list, place a check mark next to each network protocol
required for your site, and then click Next.
9. In the Network Services window, there are four default options. Unless you are
following specific guidelines from your MIS department, select the default settings.
10. Click Next to install the selected components, and then click Next again.
11. When prompted, enter the path to the Windows NT installation files (usually
C:\I386), and then click Continue.
12. When the system prompts again for NT files, enter the LAN subdirectory.
13. In the 3Com network adapter window, accept the default settings, and then click
Continue. Values are assigned automatically.
14. Answer the network questions. If you don't know the answers ask your network
administrator.
15. When the window for enabling or disabling protocols opens, click Next.
16. When NT is ready to start the network, click Next to copy the network files.
156 Corporate Evaluator's Guide