Connecting To A Pc - FujiFilm FinePix F650 Owner's Manual

Connecting to a PC

By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.99, 102)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
A Insert the xD-Picture Card with images into the
camera (➝p.19).
CAUTION
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
B Press w for about 1 second to turn the
camera on in Playback mode.
C Press MENU/OK to display the SET-UP
menu.
Refer to "Using the SET-UP menu"
(➝p.83).
CD-ROM
(Software for FinePix CX)
D Select @ DSC in
SET-UP menu (➝p.85).
SET-UP UP SET
AUTO POWER OFF AUTO POWER OFF
TIME DIFFERENCE TIME DIFFERENCE
USB MOD USB MOD
DSC DSC
VIDEO S VIDEO S
PICTBRIDGE PICTBRIDGE
RESET RESET
E Press POWER to turn the camera off.
F Turn your PC on.
USB MODE in the
ENGLISH ENGLISH
2 MIN 2 MIN
Continued Q
105