Connecting To A Pc - FujiFilm S1000fd Owner's Manual

I
Connecting to a PC
CD-ROM
(Software for FinePix)
AC-5VX (sold separately)
and CP-04 (sold separately)
@
Press
IE
for about 1 second to turn the
camera on in Playback mode.
<D
CAUTION
• Do not format the Memory Card in the camera on the PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
@
Connect the camera to your PC using the USB cable
(included).
@Setyour PC
~\ MEMO
L.---l
In Windows, if FinePixViewer is already installed, the
driver will be set automatically. No action is required.
CD
Insert the Memory Card with images into the camera
(-+p.18).
You can use the xD-Picture Card and the SO
Memory Card with the FinePix S1000fd.
In this Owner's Manual, these cards are expressed as
"Memory Card".
FinePixViewer Overview
Enables importing images, managing files and folders,
and ordering prints using the internet (only Windows
users).
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and
file management etc.
<D
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
Refer to Software
Installation (-+p.125, 127)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
130