FujiFilm FinePix F650 Owner's Manual page 87

FRAME NO.
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
<CONT.>
A A
B B
Formatted xD-Picture Card or internal memory used
*
for both A and B.
CONT. : Pictures are stored beginning from the highest
file number stored on the last xD-Picture Card
or internal memory used.
RENEW : Pictures are stored on each xD-Picture Card
beginning with a file number 0001.
<RENEW>
How to use the SET-UP menu (➝p.83)
CHECK
100-0001 100-0001 100-0001 100-0001
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are
frame number setting (CONT. or RENEW) is changed
to CONT. and the frame number itself does not return to
0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current xD-Picture Card
when the xD-Picture Card already contains image files
with file numbers higher than the highest file number on
the last xD-Picture Card.
• File number runs from 0001 to 9999. Once 9999 is
exceeded, the directory number changes from 100 to
101. The maximum number is 999-9999.
• The displayed frame number may differ for images
photographed on other cameras.
Frame number
File number
Directory number
RESET (➝p.85), the
Continued Q
87