Table of Contents
Advertisement
16
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
• Press the lock
battery upwards in the direction
of the arrow
• Insert the SIM card in the opening
with the contact area facing
downwards and push gently until it
engages below the holder (make
sure the angled corner is in the
correct position
Getting started
, then remove the
.
).
• Insert the battery in the lower
edge
, then press downwards
until it engages.
Remove SIM card
• Remove the battery. First push the
SIM card
gently through the
slot for the holder and at the same
time lift it up slightly
opposite side. Then remove the
SIM card completely.
Additional information
Always switch off your phone before
removing the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have an
older card.
on the
Advertisement
Table of Contents
