Removing The Software - Sharp AL-1556 Operation Manual

The MFP driver cannot be correctly installed by Plug and
Play (Windows 2000/XP) (USB only)
In Windows 2000/XP, if the MFP driver cannot be correctly installed by Plug and
Play (for example, Plug and Play takes place without copying the required files for
the MFP driver installation), follow these steps to remove unneeded devices and
then install the MFP driver as explained in "SET UP THE SOFTWARE" (p.40).
1
Click the "start" button, click "Control Panel", and then click
"Performance and Maintenance".
In Windows 2000, click the "Start" button, select "Settings", and then click
"Control Panel".
2
Click "System", click the "Hardware" tab, and click the "Device
Manager" button.
In Windows 2000, double-click the "System" icon, click the "Hardware"
Note
tab, and click the "Device Manager" button.
3
Click the
devices".
If "AL-XXXX" and "SHARP AL-XXXX"
appear, select and delete both of
these items.
If "Other devices" does not appear, close the "Device Manager"
Note
window.
4
Install the software as explained in "INSTALLING THE
SOFTWARE".

Removing the software

If you need to remove the software, follow these steps.
1
Click the "start" button and then click "Control Panel".
In Windows 95/98/Me/NT 4.0/2000, click the "Start" button, select
"Settings", and then click "Control Panel".
2
Click "Add or Remove Programs".
In Windows 95/98/Me/NT 4.0/2000, double-click the "Add/Remove
Programs" icon.
3
Select "SHARP AL-1500/1600CS Series MFP (or Printer) Driver"
and Button Manager from the list, and remove the software.
For more information, refer to your operating manual or to the help files for
your operating system.
TROUBLESHOOTING AND MAINTENANCE
icon beside "Other
Other devices
AL-XXXX Scanner
SHARPAL-XXXX
8
79