Preparing The Machine For Installation - Sharp AL-1556 Operation Manual

PREPARING THE MACHINE FOR INSTALLATION

1
Be sure to hold the handles on both
sides of the machine to unpack the
machine and carry it to the installation
location.
2
Remove all pieces of tape shown in the illustration below and
then open the RSPF and remove the protective materials. Take
out the bag containing the TD cartridge.
3
Release the scan head locking switch.
The scan head locking switch is under the document glass.
If the switch is locked (
( ) as shown below.
Grasp here and turn in
the direction of the arrow.
Lock
)
, the machine will not operate. Unlock the switch
Unlock
1
13