Start Guide; Preparing The Unit For Installation; Installing The Td Cartridge - Sharp AL-2021 Start Manual

DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to
ensure that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the
guide is explained in "5. HOW TO USE THE OPERATION GUIDE". After installation, read the Operation Guide to make full use of all the machine
has to offer.

1. PREPARING THE UNIT FOR INSTALLATION

Be sure to hold the handles on both sides of the unit
1
to unpack the unit and carry it to the installation
location.
Remove the protective materials.
3
AL-2041
only

2. INSTALLING THE TD CARTRIDGE

Open the multi-bypass tray, and then
1
open the side cover.
2
3
Hold the cartridge on both sides and shake
4
it horizontally four or five times. Hold the
tab of the protective cover and pull the tab
to your side to remove the cover.
4 - 5
AL-2021
only
Remove the CAUTION tape from the front cover and remove
2
the two protective pins from the fusing unit by pulling the
strings upward one at a time.
1
CAUTION tape
Gently insert the TD cartridge until it locks
5
in place.
Check if the following components and accessories are included.
2
Start Guide
(This sheet)
Power cord
Protective pins
MODEL:AL-2021
Software CD-ROM
Operation Guide CD-ROM
Push gently on both sides of the
3
front cover to open the cover.
Close the front cover and then the side cover by
6
pressing the round projections near the side cover
open button.
When closing the covers, be sure to close the
front cover securely and then close the side
cover. If the covers are closed in the wrong
order, the covers may be damaged.
AL-2041
Drum cartridge
(installed in unit)
TD cartridge
1