Protecting Images Frame, Set All, Reset All - FujiFilm FinePix A310 Owner's Manual

PROTECTING IMAGES FRAME, SET ALL, RESET ALL

PLAYBACK MENU
1
1 0 2 0
2
3
0 1 2 0
4
0 1 2 0
46
1 Set the Mode dial to " ".
2 Press the "MENU/OK" button to display the
menu screen.
Protection is a setting that prevents frames (files)
from being accidentally erased. However, the
"FORMAT" function erases all the frames (files),
including protected frames (files) (➡P.52).
Press "d" or "c" to select " " PROTECT.
RESET ALL
Removes the protection from all the frames (files).
SET ALL
Protects all the frames (files).
FRAME
Protects or unprotects only the selected frame
(file).
1 Press "a" or "b" to select "FRAME", "SET ALL"
or "RESET ALL".
2 Press "MENU/OK" button to confirm your
selection.
FRAME SET
1 Press "d" or "c" to select the file to be protected.
2 Press the "MENU/OK" button to protect the file
currently displayed.
To protect another file, repeat steps 1 and 2. To
finish protecting files, press the "BACK" button.
FRAME RESET
1 Press "d" or "c" to select the protected file.
2 Press the "MENU/OK" button to unprotect the
displayed file.
0 1 0 2
G
!
It may take a while for excuteing this function depending on
the number of images.
SET ALL
Press the "MENU/OK" button to protect all the files.
G
!
It may take a while for excuteing this function depending on
the number of images.
RESET ALL
Press the "MENU/OK" button to unprotect all the
files.
N N
To stop the procedure mid-way
If large number of images are recorded in the xD-
Picture Card, protecting or unprotecting all the
frames may take some time.
If you want to shoot a picture or a movie during the
procedure, press the "BACK" button. To then return
to protecting or unprotecting all the frames, start the
procedure on P.46 from step 1 .
47