Dpof All Reset - FujiFilm FinePix A310 Owner's Manual

DPOF SET FRAME
PHOTO MODE PLAYBACK
3
1 0 2 0
N
When DPOF settings were specified on another camera
4
1 0 2 0
Total number
of prints
Setting for
that frame
5
30
1 Press "a " or "b " to select "WITH DATE" or
"WITHOUT DATE". If you select "WITH DATE",
the date is imprinted on your prints.
2 Press the "MENU/OK" button.
G
!
By selecting the "WITH DATE" setting, you can have the date
imprinted on your shots when you use the Print Service or a
DPOF-compatible printer. (Depending on the printer
specifications, the date may not be printed in some cases.)
N
When the data includes a frame with DPOF setting
that were specified on another camera,
" " is displayed.
Pressing the "MENU/OK" button erases all of the
DPOF settings already specified for each frame. You
must then specify the DPOF setting for each frame
again.
G
!
Press the "BACK" button to leave the previous settings
unchanged.
G
!
During playback, check that the " " is displayed for the
previous settings.
1 Press "d" or "c" to display the frame for which
you want to specify DPOF settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame to be printed. For
frames (files) that you do not want printed, set
the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
G
!
You can order prints of up to 999 image frames on the same xD-
Picture Card.
G
!
DPOF settings cannot be specified for movies.
If you press the "BACK" button during the settings,
all the new settings are cancelled. If there were
previous DPOF settings, only the modifications are
cancelled.
Always press the "MENU/OK" button when you
complete the settings.
If you press the "BACK" button, no DPOF settings
are specified.
N N
Cancelling a frame
To cancel the DPOF setting for a frame you have
1 3
specified (cancel frame), perform steps to
then 1 press "d" or "c" to select the frame with
the DPOF setting you want to cancel and then 2
set the number of prints to 0 (zero). To cancel the
DPOF setting for another frame, repeat steps 1
and 2. When you have completed the settings,
you must press the "MENU/OK" button.
PHOTO MODE PLAYBACK
1
1 0
ON
3 0
2
1 0
3
and

DPOF ALL RESET

1 Slide the Power switch to the side to turn the
2 0
camera on.
2 Set the Mode dial to "
3 Press the Photo mode ( ) button.
1 Press "d" or "c" to select " " DPOF ALL RESET.
2 0
2 Press the "MENU/OK" button.
A confirmation screen appears.
To reset all the DPOF settings, press the
"MENU/OK" button.
".
31