I Standard Number Of Shots Per Xd-Picture Card; Number Of Available Frames; Using Af/Ae Lock - FujiFilm FinePix A310 Owner's Manual

SHOOTING STILL IMAGES (
STILL IMAGE MODE

NUMBER OF AVAILABLE FRAMES

A 1M 1M ３３ ３３

I Standard number of shots per xD-Picture Card

The table below shows the standard number of available shots for a new xD-Picture Card formatted on the camera. The
larger the xD-Picture Card capacity, the greater the divergence between the actual number of available shots and the
number shown here. Also, because the amount of data recorded for a shot varies depending on the subject, in some cases
the number of shots may decrease by 2 or may remain the same. As a result, the actual number of recordable shots may
either decrease or increase.
Quality 6M
2816 × 2120
Number of recorded pixels
DPC-16 (16 MB) 10
DPC-32 (32 MB) 21
DPC-64 (64 MB) 43
DPC-128 (128 MB) 86
DPC-256 (256 MB) 173
20
AUTO MODE )
The number of available shots in this card is
displayed on the screen.
G
!
See P.26 for information on changing the quality mode.
G
!
The default quality mode " " set at shipment is .
3M 1M 0.3M
2048 × 1536 1280 × 960 640 × 480
19 33 122
40 68 247
81 137 497
162 275 997
325 550 1997

USING AF/AE LOCK

1
A 1M ３３ ３３
2
A 1M ３３ ３３
3
4
Beep
N
AF (Autofocus)/AE lock (Auto-exposure)
On the FinePix A310, when you press the shutter button down half way, the focus and exposure
settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if
you want to set the exposure before you compose the final shot, lock the AF and AE settings and then
compose and shoot your picture to get the best results.
In a shot with this type of composition, the subjects
(two people in this case) are not in the AF frame. If
the shot is taken at this point, the subjects will not
be in focus.
Move the camera slightly so that one of the
subjects in the AF frame.
Without moving the camera, press the shutter
button down halfway (AF/AE lock). Focusing is
complete when the AF frame on the LCD monitor
shrinks and the viewfinder lamp (green) stops
blinking and remains lit.
Continue to hold the shutter button down halfway
(AF/AE lock). Move the camera back to the original
image and then fully press down on the shutter
button.
G
!
You can reapply the AF/AE lock as many times as you like
before releasing the shutter.
G
!
The AF/AE lock operates in all photography modes and can
be used to ensure excellent results.
N
21