Slideshow Setup - Sharp AQUOS LC-20B5E Operation Manual

Playing Back Still Pictures (Continued)

Slideshow Setup

You can set the interval to 1-10 seconds, 1 minute, 15 minutes,
or 60 minutes, and select the playback order from among
"Normal", "Random" or "My programme".
1
Press CARD to display the index of still picture.
0 0
2
Press MENU to display the Menu screen.
3
Press \/| to select "Card". Press '/" to select "Still
setup", and press OK.
4
Press '/" to select "Slideshow start", and press OK.
5
Press \/| to select "Yes", and press OK.
• The slideshow starts according to the initial mode.
Press MENU if you want to change the settings halfway
through.
48
6
Press '/" to select "Still setup", and press OK. Press
'/" to select "Slideshow setup", and press OK.
7
Press '/" to select "Interval". Press \/| to select
"1-10 Sec", "1 Min", "15 Min" or "60 Min".
8
Press '/" to select "Order". Press \/| to select
"Normal", "Random" or "My programme".
0 0 0 0
9
Press '/" to select "Repeat". Press \/| to select
"On" or "Off".
10
Press '/" to select "Initial". Press \/| to select
"Slideshow" or "Index", and press OK.
• The initial screen is the mode first displayed when switching
to the still picture mode.
11
Press '/" to select "Slideshow start", and press OK.
Press \/| to select "Yes", and press OK.
• The slide show resumes in accordance with the new
settings.
If you press I, the slideshow will be stopped.
NOTE
• When using the slideshow for the first time after purchase, it
operates in accordance with the factory presets as follows.
Interval: 5 seconds
Order: Normal
Repeat: Off
• Slideshow is paused while the Menu screen is displayed.
• The display interval does not include the time it takes for the LCD
TV set to process the image and display it. Therefore, the image
may not be displayed for the display interval set. (In general, the
processing time slows it down by 1-3 seconds.)