Basic Operation; Turning On And Off The Main Power; Standby/On; Switching The Tv/Video (Av1/Av2/Card/Tv) Mode - Sharp AQUOS LC-20B5E Operation Manual

Basic Operation

Turning On and Off the Main Power

STANDBY/ON indicator
● Press X (MAIN POWER). The STANDBY/ON indicator
instantly changes from blinking red to green and the LCD
TV set is turned on.
On-screen display
1 S 0 6
NOTE
• The On-screen display disappears after a few seconds.
● To turn off the main power, press X (MAIN POWER).

STANDBY/ON

To turn off the LCD TV
B . The STANDBY/ON indicator will turn red. B B
Press B B
To turn the LCD TV back on
Press B B again. The STANDBY/ON indicator will turn green. B B B
X (MAIN POWER)

Switching the TV/VIDEO (AV1/AV2/CARD/TV) Mode

1
Turn on the power of the connected video equipment.
2
Press TV/VIDEO to select the applicable input source.
The screen changes in order of AV1, AV2, CARD and
TV mode each time TV/VIDEO is pressed.
AV1 mode
A V 1
AV2 mode
A V 2
CARD mode
V i d e o i n d e x
TV mode
1 S 0 6
NOTE
• About the video modes
• AV1: Select this when viewing the signals from the video
equipment connected to the AV-IN1 terminal.
• AV2: Select this when viewing the signals from the video
equipment connected to the AV-IN2 terminals using the
VIDEO or S-VIDEO terminal for video input.
• CARD: Select this when running a memory card. ("Still index"
will be displayed when still picture mode is selected, and
"Video index" will be displayed when motion picture
mode is selected.)
• If both VIDEO and S-VIDEO terminals are connected with cables,
the S-VIDEO input terminal is selected as the high priority.
11