Sharp CD-BA250H Operation Manual page 14

System Connections (continued)
„ Placing the speaker system
There is no distinction between the right and the left speakers.
Left speaker
Speaker grilles are removable:
Make sure nothing comes into contact with the speaker diaphragms when you
remove the speaker grilles.
„ Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket. If you plug the unit first, the unit will enter the demon-
stration mode.
Note:
Unplug the unit if it will not be used for a prolonged period of time.
E-8 ENGLISH
Right speaker
„ Demonstration mode
The first time the unit is plugged, the unit will enter the demonstration mode. You will
see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the X-
BASS/DEMO button. The unit will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra
bass mode.
„ Display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button.
Dimmed Brightened