Table of Contents
Advertisement
VC-MH71SM ENGLISH.book Page 6 Tuesday, April 20, 1999 10:52 AM
INSTALLING YOUR VCR
AUTO INSTALLATION
STOP
Press
to switch on your VCR.
This model will automatically tune in the TV channels in your area, sort them into a standard
order and set the clock.
The screen opposite should be showing on your TV.
Follow the instructions from the screens.
(Auto sort will take a few minutes to complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press
exit.
If the clock is NOT automatically set, the clock
screen will appear., refer to
SETTING THE CLOCK
been set correctly, press DISPLAY until the time
appears on the display.
If you wish to customise the channel order refer to
MANUALLY SORTING CHANNELS
VCR RESET
1.
Press
STOP
to switch on the VCR.
2.
Press and hold
MENU
for 10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
Refer to the
CUSTOMISED INSTALLATION
•
Your VCR could not tune automatically - due to for example poor reception.
•
You wish to re-arrange the channel order.
•
You wish to change the time on the clock or if the VCR could not set the time.
All the programmes should now be correctly tuned in and the clock set.
MENU
to
MANUALLY
. To check the clock has
.
and
CHANNEL
buttons together on the front of the VCR
chapter if
GB-6
AU T O
I N S T A L L A T I ON
P R E S S S E T K E Y T O S T AR T
AU T OMA T I S CH E E I N S T E L L UNG
Z UM B EG I NN , D I E S E T - T A S T E
DRÜCK E N .
S E T
: E I NGAB E ME NU : E ND E
•
If the screen above does not
appear, follow the procedure
VCR RESET
below.
Advertisement
Table of Contents
