Sharp LC-30AA1M Operation Manual page 9

Preparation
Setting the System
H LC-30AA1M
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
(BLACK)
3
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
LC-37AA1M(E)-a
Display (rear view)
(GREY)
Connect the plug
firmly until the hooks
on both sides click.
System cable
AVC System (rear view)
9
Press down the four
upper hooks to remove
the cover toward you.
(WHITE)
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
System cable
(WHITE)
(BLACK) (GREY)
AC cord
03.11.6, 9:46 AM
AC cord
9