Table of Contents
Advertisement
INSTALLING YOUR VCR
AUTO INSTALLATION
Press
STOP
to switch on the VCR.
This model will automatically tune in the TV
channels in your area, sort them into a
standard order and set the clock.
The screen opposite should be showing on
your TV.
Follow the instructions from the screens. (Auto
installation may take a few minutes.)
On completion the MOVE menu will appear
showing the preset channel order. Press
If the clock is not automatically set, the clock screen will appear. Refer to
SETTING THE CLOCK
the time appears on the display.
If you wish to customise the channel order, refer to
VCR RESET
STOP
1. Press
to switch on the VCR.
2. Press and hold
MENU
10 seconds.
3. The AUTO INSTALLATION screen should now be showing on your TV.
4. Follow the on-screen display to proceed with installation.
CUSTOMISED INSTALLATION
Refer to the
•
Your VCR could not tune automatically - due to for example poor reception.
•
You wish to re-arrange the channel order.
•
You wish to change the time on the clock or if the VCR could not set the time.
All the programmes should now be correctly tuned in and the clock
set.
MENU
. To check the clock has been set correctly, press
L buttons together on the front of the VCR for
and
CHANNEL
6
AU T O
I N S T A L L A T I ON
P R E S S S E T K E Y T O S T AR T
AU T OMA T I S CH E E I N S T E L L UNG
Z UM B EG I NN , D I E S E T - T A S T E
DRÜCK E N
S E T : E N T E R
If the screen above does not appear,
follow the procedure
to exit.
MANUALLY SORTING CHANNELS
chapter if
ME NU : E X I T
VCR RESET
below.
MANUALLY
DISPLAY
until
.
Hide quick links:
Advertisement
Table of Contents
