Special Features On Your Vcr Post Code Security - Sharp VC-MH722LM Operation Manual

SPECIAL FEATURES ON YOUR VCR
POST CODE SECURITY
This feature should allow the Police to identify you as the owner of the VCR if it is stolen. Each
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
If you wish to use this function, follow the procedure below.
1.
Press MENU .
2.
Press the [ /
select SET UP. Press
3.
Press [ / ] to select POST CODE. Press
to confirm.
4.
Enter your desired PIN number using the
NUMBER BUTTONS
buttons. This must be a 4 digit number in the
range
0000 - 9999.
5.
Using the [ /
Postcode. Press
6.
Record your PIN number in the box provided
for future reference.
NOTE:
• Your Postcode can be changed at any time, but you must first enter your correct PIN
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
If you wish to change your PIN number at any time:
1.
Follow steps 1 to 3 above.
2.
Enter your current PIN number. Press
3.
Press to re-select PIN number.
4.
Enter your new PIN number. Press
IMPORTANT:- Please keep your Operation Manual separate from your
VCR.
If problems persist contact the SHARP Helpline on tel: 0990-274277
] menu select buttons to
SET
to confirm.
or the [ /
/ ]
/ buttons, enter your
SET
to confirm.
SET
SET
P I N NUMB E R
SET
- - - -
S E L E C T :
E N T E R
]
Remote Control
to confirm
to confirm.
26
POS T COD E
POS T COD E
- - - - - - -
CHANGE
: S E T E X I T : ME NU
ZERO
TIMER AUDIO SKIP
ON/OFF OUT SEARCH BACK
MENU SET
PLUSCODE
CLEAR
MODE OSD
1 2 3
DISPLAY
4 5 6
7 8 9
C