Table of Contents
Advertisement
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
(
2.
Press
FAST FORWARD
shuttle dial clockwise for Fast Forward and counter clockwise for Rewind then release.
3.
To stop fast forward/rewind, press
FORWARD/REVERSE VISUAL SEARCH
REVERSE VISUAL SEARCH x 3
REVERSE VISUAL SEARCH x 7
Visual Search can be operated during playback by either the Fast Forward/Rewind buttons
on the remote control or by using the shuttle dial on the VCR front panel.
Remote Control Operation
1.
Press
FAST FORWARD
2.
To decrease the speed, press
3.
Press
PLAY/X2
OR: Shuttle Dial Operation
As the Shuttle dial is rotated a soft click can be felt. During playback, rotating the dial one click
clockwise will make the VCR enter Visual search x 3 mode. An additional click clockwise or
counter clockwise will change the operation as illustrated above.
The start position shown above is only an example. The Shuttle dial can be operated from any
position.
Press
PLAY/X2
(
shuttle dial clockwise/counter clockwise until the playback function is
selected.
NOTE:
•
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
If problems persist contact the SHARP Helpline on tel: 0990-274277
) to stop the video tape.
(
)/
REWIND
STOP
COUNTERCLOCKWISE
(
)/
REWIND
FAST FORWARD
(
) to resume playback.
) to resume playback at any time, or rotate the
(
) on the remote control or rotate the
(
).
(ANTI)
CLOCKWISE
PLAYBACK
VISUAL SEARCH x 3
VISUAL SEARCH x 7
PLAY/X2
(
) during playback.
REWIND
(
)/
10
(
) again.
REW
FF
PLAY / X2
PAUSE/STILL
REC
STOP
Remote Control
Hide quick links:
Advertisement
Table of Contents
