Recording From Other Equipment - Sharp VC-MH722LM Operation Manual

ADVANCED OPERATION

RECORDING FROM OTHER EQUIPMENT

You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
Mono/Stereo Camcorder
1.
Connect your signal source (eg. Camcorder,
Digital Camera etc) to the desired scart socket
on the back of the VCR using the manufacturers
recommended cable (not supplied).
2.
Ensure that the tape on which you wish to record
is inserted into the VCR.
3.
Press INPUT SELECT
until the VCR display shows
4.
Press REC to start recording.
OTHER CONNECTIONS POSSIBLE!
• If you wish to record from a source connected to
LINE 1 IN/OUT, select
Press REC to start recording.
• If you wish to record from a source connected
with audio phono leads to the sockets on the
front of the VCR (if fitted), select
REC
Press to start recording.
NOTE:
• There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
If problems persist contact the SHARP Helpline on tel: 0990-274277
Optional Scart connection (not supplied)
on the remote control
AM
L2
.
AM
L1 .
AM
L3 .
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE 1(I) IN
/OU T
SON /VID EO
(L1/ I)
PM
PM
PM
24
➘
Input Select
7 8 9
CHANNEL
AM/PM INPUT SELECT
0
REW FF
PLAY / X2
LIN E1 (I) IN
/OU T
SO N/V IDE O
(L1 /I)
LINE IN 3
L - AUDIO - R
VIDEO