Sound Mode Settings; Sound Via; Loudsp. Sound; Av Audio Sig - Sharp LC-13SH1E Operation Manual

Sound Mode Settings

You can make various sound mode settings.
1
Perform steps 1 and 2 in Sound Adjustments to
display the Sound Menu screen.
2
Press '/" to select the desired item, and press OK.
3
Press '/" to select the sound mode, and press OK.
4
Press END to exit.
Selected item

Sound via

TV Hi-fi

Loudsp. sound

Stereo Mono
Sound 1
Nicam Mono
Mono

AV audio sig.

Sound 1

Sound wide

On (For increasing the spread of the sound)
Choice
Sound 2 Sound 1+2 Mono
Sound 2 Sound 1+2
Useful Features (Continued)
NOTE
For the "Sound via" setting
• When setting "Sound via" to "Hi-fi" in the Sound Menu screen, the
sound from the built-in speakers will be turned off. To exit this
mode, switch "Sound via" from "Hi-fi" to "TV" in the Sound Menu
screen.
• Pressing i (+)/(–) will display the volume indicator shown
below. You can adjust the volume by pressing i (+)/(–).
Hi-fi Volume
20
For the "Loudsp. sound" setting
• The sound output modes differ depending on whether or not a
NICAM or A2 stereo signal is received. See page 24.
For the "AV audio sig." setting
• Select "Sound 1" or "Sound 2" when playing back the video from
mono-video recorders and "Sound 1+2" when playing back from
stereo-video recorders.
Off
15