Sound Mode Settings; Nicam And A2 Stereo Broadcast Selection - Sharp LC-AQUOS 20S5E-WH Operation Manual

Useful Features (continued)

Sound Mode Settings

You can make various sound mode settings.

Perform steps  and 2 in Sound Adjustments to display the
Sound Menu screen.
2
Press ▲/▼ to select the desired item, and press OK.
3
Press ▲/▼ to select the sound mode, and press OK.
4
Press END to exit.
Selected item
Loudsp. sound Stereo
Sound 1
Nicam
Mono
Auto vol. On
Clear voice On
Sound wide On (For increasing the spread of the sound)
NOTE
For the "Loudsp. sound" setting
• The sound output modes differ depending on whether or not a
NICAM or A2 stereo signal is received. See "NICAM and A2 Stereo
Broadcast Selection" below.
For the "Auto vol." setting
• Different sound sources, fairly often do not have the same volume
level, for example the changing from movie to the advertisements.
The Automatic Volume Control (Auto vol.) solves this problem and
equalises the volume levels.
For the "Clear voice" setting
• This function emphasises speech voice against the background
noise for more intelligibility. It is not recommended for music
sources.

NICAM and A2 Stereo Broadcast Selection

This enables the selection of the reception mode when
receiving a NICAM-I, NICAM-B/G or an A2 stereo signal. To let
you enjoy NICAM or A2 stereo broadcasting, this LCD TV set
receives NICAM stereo system, A2 stereo system, bilingual,
and monaural broadcasts.
Each time you press
follows:
Broadcast Stereo*
Stereo
NICAM
Mono
Stereo
A2 Stereo
Mono
* When "Mono" is selected, the TV sound is output monaurally.
NOTE
• If the button is not pressed for a few seconds, the mode setting is
automatically terminated and the LCD TV set returns to the normal
mode.
0

Choice
Mono
Sound 2 Sound 1+2
Mono
Off
Off
(Sound), the mode changes as
Bilingual
Sound 1 Sound 2
Mono Sound 1+2
Sound 1 Sound 2
Mono Sound 1+2
Mono
Off
Monaural
Nicam
Mono
–