Table of Contents
Advertisement
OPERATING CONTROLS
POWER SWITCH; PRINT / ITEM
COUNT MODE SELECTOR:
"OFF": Power off.
"•":
Power ON. Set to the non-print mode.
"P":
Power ON. Set to the print mode.
"P•IC": Power ON. Set to the print and item count
mode.
"P•IC" is on:
For addition or subtraction, each time
pressed, 1 is added to the item counter, and
each time
• The count is printed when the calculated
result is obtained.
• Pressing of
counter.
"P•IC" is off: Neutral
Note:
The counter has a maximum capacity of 3
digits (up to ±999). If the count exceeds the
maximum, the counter will recount from
zero.
DECIMAL SELECTOR:
Presets the number of decimal places in the answer.
is pressed, 1 is subtracted.
,
or
clears the
In the "F" position, the answer is displayed in the
floating decimal system.
CONSTANT/ADD MODE SELECTOR:
"K": The following constant functions will be per-
formed:
Multiplication:
The calculator will automatically remember the first
number entered (the multiplicand) and
tion.
Division:
The calculator will automatically remember the
is
second number entered (the divisor) and
tion.
"•": Neutral
"A": Use of the Add mode permits addition and
subtraction of numbers without an entry of the
decimal point. When the Add mode is activated,
the decimal point is automatically positioned
according to the decimal selector setting.
Use of
,
and
the Add mode and decimally correct answers will
be printed at the preset decimal position.
ROUNDING SELECTOR:
" ": An answer is rounded up.
2
instruc-
instruc-
will automatically override
Advertisement
Table of Contents
