Cooking Chart - Sharp KS-ZA10HH Operation Manual

OPERATION
HOW TO USE AUTO START Setting
Please use this setting if you want to delay cook up time.
METHOD
1
After preparing the amount of rice, adjust
water level, setting the inner pot and close
the lid securely,
2
Press the required MENU (COOK) key.
WHITE RICE, NATURAL RICE and PORRIDGE
key can be used.
• Press the CLEAR key if an error was made while programming.
• Do not cook the rice mixed with ingredients or seasonings when Auto Start setting is used.
• Do not set the Auto Start setting too long in summer time as the water may deteriorate.
WARM/CLEAR key

Cooking Chart

Menu
Short grain rice
White Rice
Long grain rice
Natural Rice
Mixed Rice
Japanese thick
Porridge Japanese thin
Chinese
Express Cook
• Cooking time is set at specified voltage, room temperature 20 C, water temperature 18 C and under standard water level.
• Cooking time may vary a little depending on the kind or volume of rice and ingredients, room temperature, water
temperature, voltage, etc.
press TIMER key.
Volume of rice (cup)
1 - 5.5
1 - 4
1 - 4
1 - 4
0.5 - 1.5
0.5 - 1
0.5
1 - 5.5
• Set the cook up time.
(If you want to cook up after 8 hours, press
TIMER key 8 times.)
• Timer can be set 1 to 12 hours.
• Cooking will begin immediately if the setting
time is 1 hour. (In case of NATURAL RICE,
2 hours.)
• Auto start timer starts by pressing MENU
key. And the display of timer will shift every
one hour to indicate the remaining time.
8 7
• Stir the rice well within 30 minutes after cooking.
• After using, press CLEAR key, then pull the
plug from the electric wall receptacle.
Time (min.)
48 - 57
52 - 70
106 - 126
50 - 58
54 - 63
59 - 63
31 - 46
5
NOTES
60