Table of Contents
Advertisement
741 eng.book Page 5 Tuesday, April 27, 1999 11:35 AM
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and LOW POWER modes. The VCR display will not be
illuminated in low power mode.
1.
Ensure your VCR is still in the STANDBY
mode (not low power).
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press and hold the
seconds. The VCR will search and display
the ideal RF channel.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press
SET
to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
MENU
button for 3
/
] keys.
The TV is tuned to the VCR.
GB-5
Example:
MENU SCREEN
T I ME R
MODE
GRUND E I N ST E L L UNG
: WÄHL E N
S E T
: E I NGABE ME NU : E NDE
Advertisement
Table of Contents
