Table of Contents
Advertisement
741 eng.book Page 22 Tuesday, April 27, 1999 11:35 AM
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
PLAY/X2
(
2.
Press
SKIP SEARCH
The number of times you press
determines the forward search time.
•
After searching, normal playback
will resume automatically
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
/
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
DPSS
three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3.
Press
DPSS
once. A -1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
Rewind
DPSS
Number
4.
To cancel the search before it has finished, press
NOTES:
•
Recordings must be longer than 3 minutes..
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
) to start the video tape playing.
on the remote control.
SKIP SEARCH
DPSS Signals
+2
+1
Current tape position
GB-22
1 press
= 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
Fast Forward
STOP
PLAY/X2
(
) or
(
) .
Advertisement
Table of Contents
