Specifications - Sharp VC-MH703HM Operation Manual

MORE INFORMATION ABOUT YOUR VCR

SPECIFICATIONS

Format:
Number of heads:
Video signal system::
Hi-Fi audio recording system
(VC-MH703HM/
VC-MH713LM)
Maximum playing time:
Tape width:
Tape speed:
Antenna:
Reception channels:
RF output signal:
Power requirement:
Power consumption:
Operating temperature:
Storage temperature:
Video input:
Video output:
Audio input
(VC-MH703HM/
VC-MH713LM)
Audio output
(VC-MH703HM/
VC-MH713LM)
Audio input
(VC-M303LM)
Audio output
(VC-M303LM)
Hi-Fi audio
(VC-MH703HM/
VC-MH713LM)
Dimensions:
Weight:
Supplied accessories:
• Specifications are subject to change without notice as part of our policy of continuous
improvement.
• No liability is accepted for any inaccuracies or omissions in this publication, although
every possible care has been taken to make it complete and as accurate as possible.
If problems persist contact the SHARP Helpline on tel: 0990-274277
VHS PAL standard
FOUR
(VC-MH703HM/VC-MH713LM)
TWO
(VC-M303LM)
PAL colour or monochrome signal: 625 lines
Deep layer recording system conforming to stereo
Hi-Fi VHS standard.
480 min. with E-240 video cassette in Long Play (LP)
mode
12.7 mm
23.39 mm/s Standard Play (SP): 11.70 mm/s Long
Play (LP)
75 Ω unbalanced
UHF channel 21-69
(VHF CHANNELS A-J VC-MH713LM and VC-M303LM only)
UHF channel 21-69
AC 230-240V, 50 Hz
17 W approx. (STANDBY ≤ 3W)
VC-MH713LM)
16 W approx. (STANDBY ≤ 3W)
5 ˚C to 40 ˚C
-20 ˚C to 55 ˚C
1.0 Vp-p, 75 Ω
1.0 Vp-p, 75 Ω
Line1&2: -3.8 dBs, 10 kΩ, Line 3: -5.0 dBs, 47 kΩ
Line1&2: -3.8 dBs, 1 kΩ, Audio out: -3.8 dBs, 1 kΩ
Line1: -3.8 dBs, 10 kΩ
Line1: -3.8 dBs, 1 kΩ
Dynamic range: ~90dBs typ. (SP);
Frequency response: 20 Hz - 20 kHz;
Wow and Flutter :<0.005% Wrm (JIS A)
360(W) x 289(D) x 93(H) mm
3.2 kg (approx.)
75 Ω RF Connection cable, operation manual,
remote control, AA/R6/UM3 battery (x2)
34
(VC-MH703HM/
(VC-M303LM)