ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
VC-M303LM
You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
Mono/Stereo Camcorder
1.
Connect your signal source (eg. Camcorder,
Digital Camera etc) to the desired scart socket
on the back of the VCR using the manufacturers
recommended cable (not supplied).
2.
Ensure that the tape on which you wish to record
is inserted into the VCR.
3.
Press
INPUT SELECT
until the VCR display shows
4.
Press
REC
to start recording.
NOTES:
•
There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
If problems persist contact the SHARP Helpline on tel: 0990-274277
Optional Scart connection (not supplied)
A
P
on the remote control
AV
.
26
➘
Input Select
7
8
9
CHANNEL
AM/PM
INPUT SELECT
0
REW
FF
PLAY / X2