Switching On And Off - FujiFilm 2400 Owner's Manual

Fujifilm digital camera owner's manual 2400
Hide thumbs Also See for 2400:
Table of Contents

Advertisement

SWITCHING ON AND OFF

1
E
To switch the camera on in "
" photography
mode:
Slide the lens cover open until it stops.
Move the Mode switch from the "OFF" position
E
to "
" photography.
D
To switch the camera on in "
" playback mode:
Move the Mode switch from the "OFF" position
D
to "
" playback.
G
!
H
If the "
" warning appears on the LCD
monitor, the lens cover is not fully open. Slide the
16
cover all the way open until it stops.
G
2
When you switch the camera on, the viewfinder
G
lamp turns green. To switch the camera off, set
the Mode switch to "OFF".
N
N
Lens Cover Warnings
E
H
In "
" photography mode, the "
displayed if the lens cover is not open.
D
E
To switch from "
" playback mode to "
mode, open the lens cover.
N
Auto Power Off Function
If the camera is left switched on for two minutes or
more, the Auto Power Off function automatically
switches the camera off. To switch the camera back
on, set the Mode switch to OFF and then set it back to
E
D
"
" to take pictures or "
" to view images. Holding
down the "MENU/OK" button as you switch the camera
on disables the Auto Power Off function.
3
" warning is
" photography
If the date is not set, a confirmation screen
appears. Use the "
of the options below and then press the
N
"MENU/OK" button.
"SET" : Switches to the date setting screen.
"NO" : Switches to Photography/Playback mode.
G
!
If you do not set the date, the confirmation screen
will appear each time you switch the camera on. Set
the date immediately to avoid this.
G
!
See P.18 for information on setting the date.
4
With the LCD monitor on, you can check the
remaining charge in the battery.
Battery has ample charge.(No indicator
displayed.)
Battery charge low. Replace or recharge the
battery as it will run out shortly.
The battery is exhausted. The display will
" or "
" button to select one
d
c
shortly go blank and the camera will stop
working. Replace or recharge the battery.
G
!
If the battery charge is depleted, you may not be
able to switch the LCD monitor on.
B l a n k
On
On
1
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Finepix2400 zoom

Table of Contents