R Dpof Set/Reset Frame - FujiFilm 2400 Owner's Manual

R DPOF SET/RESET FRAME

PLAYBACK MENU
G
➀
1
➀
Use the " " button to select "FRAME SET/
ab
RESET".
➁
Press the "MENU/OK" button.
G
!
Always select whether or not to print the date or time
before specifying the DPOF setting.
G
!
If you use "FRAME SET" and then use "SET ALL",
the number of prints specification in "FRAME SET"
56
is cancelled.
G G
➁ ➀
2
➀
Use the " " or " " button to display the frame
d c
for which you want to specify DPOF settings.
➁
Use the " ab " button to specify the number of prints.
G
!
If you do not want a print of the frame, reset the
number of prints to "00"
G
!
The setting is not saved until you press the "
" " button to move to another frame or press the
c
"MENU/OK" button.
G
!
You can specify up to 99 prints for each frame.
Prints can be specified for up to 999 frames on the
same SmartMedia.
G
➁
3
<To Continue>
When you have completed the settings, always
press the "MENU/ OK" button to confirm the
settings. The total number of prints is displayed on
the LCD monitor and then the menu screen
R
reappears. The " " icon and the number of prints
" or
d
are displayed for frames with DPOF specifications
T
and the " " icon is also displayed if the date is set.
G
!
"TOTAL" shows the total number of prints specified.
4
<To Cancel>
Pressing the "BACK" button cancels only the
settings for the currently selected frame. The
settings for other frames are not cancelled.
To use "FRAME SET/RESET" again, repeat
2
the procedure from step .
4
57