S Dpof Date Setting; S Dpof Frame Set/Reset - FujiFilm FinePix 2300 Owner's Manual

S DPOF DATE SETTING

PLAYBACK MENU
➀
1
This function allows you to select whether or not
the date of shooting is included on the print.
➀
D
Set the Mode dial to " ".
➁
Press the "MENU/ OK" button to display the
menu on the LCD monitor.
➂
Press " " button to select " DPOF".
d c
G
!
To exit the menu, use the " " or " " button to select
d c
50
"[BACK" and then press the "MENU/OK" button.
➁ ➀
2
➂
➀
Use the " ab " button to select "
➁
Press " " or " " button to specify "DATE ON"
d c
or "DATE OFF". This setting is then valid for
all the prints until the setting is changed.
G
!
Before specifying any other settings, first specify
whether date is to be shown or not.
G
!
If you switch the camera off after selecting "DATE
ON", the setting reverts to "DATE OFF".
PLAYBACK MENU
➁
1
➀
Use the " " button to select "FRAME SET/
DATE". ab
RESET".
➁
Press the "MENU/OK" button.
G
!
To exit the menu, use the "
[
" BACK" and then press the "MENU/OK" button.
S DPOF FRAME SET
/ RESET
➀ ➁
2
Use " d " or "
G
!
Up to 99 prints can be specified for each frame, and
the maximum number of frames for which prints can
be specified on one SmartMedia is 999.
d " or " c " button to select
G
!
"TOTAL" shows the total number of prints specified.
c " to select the frame to be specified.
4
51