FujiFilm X10 Owner's Manual page 131

Warning Warning
The memory card is not formatted for use in the camera. Format the card (P 99).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card (P 99). If the message persists,
CARD ERROR
replace the card.
Incompatible memory card. Use a compatible card (P 14).
Camera malfunction. Contact a FUJIFILM dealer.
a MEMORY FULL
b MEMORY FULL
The memory card or internal memory is full and pictures can not be recorded or copied. Delete
pictures or insert a memory card with more free space.
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
• Memory card error or connection error: Reinsert the card or turn the camera off and then on again.
If the message persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card
WRITE ERROR
with more free space.
• The memory card or internal memory is not formatted: Format the memory card or internal memory
(P 99).
• The file is corrupt or was not created with the camera: The file can not be viewed.
• The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message
READ ERROR
is repeated, format the card (P 99). If the message persists, replace the card.
• Camera malfunction: Contact a FUJIFILM dealer.
The camera has run out of frame numbers (current frame number is 999-9999). Format the memo-
FRAME NO. FULL ry card and select RENEW for
then select CONTINUOUS for
PRESS AND HOLD
An attempt was made to choose a flash mode or adjust the volume with the camera in silent mode.
THE DISP BUTTON TO
Exit silent mode before choosing a flash mode or adjusting the volume (P 21).
DEACTIVATE SILENT MODE
• A search has returned more than 30,000 results: Choose a search that returns fewer results.
TOO MANY FRAMES
• More than 999 images are selected for deletion: Choose fewer images.
Description Description
B FRAME NO. Take a picture to reset frame numbering to 100-0001,
B FRAME NO. (P 100).
Warning Messages and Displays
117