Face Recognition; I Flash; External Flash; K Custom Set - FujiFilm X10 Owner's Manual

n FACE RECOGNITION

FACE RECOGNITION

n
Add portrait subjects to the face recognition da-
tabase. These subjects will be given priority dur-
ing Intelligent Face Detection, and their names
and other information can be viewed during play-
back (P 53).

I FLASH

FLASH
I
Adjust flash brightness. Choose from values be-
tween + 2 / EV and – 2 / EV. The default setting is ±0.
3 3
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
g EXTERNAL FLASH

EXTERNAL FLASH

g
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
c
• The flash may not fully light the subject at speeds
1
faster than /
1000
• Use auto or custom white balance (P 49).
• If the built-in flash is raised when ON is selected for
g EXTERNAL FLASH, the built-in flash will fire once
to provide a signal for the optional flash unit to fire.
• External flash units can be used in P, S, A, M or EXR
[±0] [±0]
(S and T only) modes.
• Fujifilm external flash units do not require this set-
ting.
a
• The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
[OFF] [OFF]
cifically for other cameras can not be used.
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P 107).

K CUSTOM SET

CUSTOM SET
K
Save settings for P, S, A, M and all EXR modes ex-
cept R (P 27).
Using the Menus: Shooting Mode
s.
87