FujiFilm X10 Owner's Manual page 129

Connections/Miscellaneous
Problem Problem
• The camera is not properly connected: Connect the camera properly (P 68).
• An A/V cable was connected during movie playback: Connect the camera once movie playback has
No picture or sound. • Input on the television is set to "TV": Set input to "VIDEO".
• The camera is not set to the correct video standard: Match the camera
• The volume on the TV is too low: Adjust the volume.
No color
Match the camera
The computer does not
Be sure the camera and computer are correctly connected (P 80).
recognize the camera.
Can not transfer RAW or
Use the bundled software to transfer pictures (P 76).
JPEG files to computer.
Pictures can not be • The camera is not properly connected: Connect the camera correctly (P 70).
printed. • The printer is off: Turn the printer on.
Only one copy is printed/
The printer is not PictBridge compatible.
the date is not printed.
• Temporary camera malfunction: Remove and reinsert the battery (P 11) or disconnect and recon-
The camera is unrespon-
sive.
• The battery is exhausted: Charge the battery (P 10) or insert a fully-charged spare battery (P 11).
The camera does not Remove and reinsert the battery (P 11) or disconnect and reconnect the AC power adapter/DC
function as expected. coupler. If the problem persists, contact your FUJIFILM dealer.
I want to use an AC
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
power adapter and DC
100 – 240 V. Consult your travel agent for information on plug adapters.
coupler overseas.
No sound. Turn silent mode off (P 98).
ended.
the TV (P 104).
Q VIDEO SYSTEM setting to the TV (P 104).
nect the AC power adapter/DC coupler.
Problems and Solutions
Solution Solution
Q VIDEO SYSTEM setting to
115