Service Pack Which Expressbuilder Supports - NEC Express5800/120Rj-2 User Manual

5-4 Installing the Operating System with Express Setup

Service Pack Which EXPRESSBUILDER Supports

The EXPRESSBUILDER DVD attached to the server supports following combination of the OS
installation media and Service Pack.
Windows Server 2003 R2 x64 Edition
– OS installation media (with Service Pack 2)
– OS installation media (No Service Pack) + Service Pack 2
– OS installation media (No Service Pack)
Windows Server 2003 R2
– OS installation media (with Service Pack 2)
– OS installation media (No Service Pack) + Service Pack 2
– OS installation media (No Service Pack)
Windows Server 2003
– OS installation media (with Service Pack 1)
– OS installation media (with Service Pack 1)+Service Pack 2
Supported Mass Storage Controllers
The NEC EXPRESSBUILDER DVD attached to your system supports the following mass storage
controllers for installation.
NOTE: If you want to install the other boards by using a driver floppy
disk ("OEM-FD for Mass storage device"), except ones listed below,
see "Installing with the OEM-FD for Mass storage device" and
"Installing Optional Mass Storage Driver" of "Parameter File Creator"
in Chapter 6.
Controllers supporting installation of OS with Express Setup
– N8103-116 RAID controller (128 MB, RAID0/1)
– N8103-117 RAID controller (128 MB, RAID0/1/5/6)
Other controllers
– N8103-75 SCSI Controller*
– N8103-90 Disk Array Controller (External SAS HDD)*
– N8103-95 SCSI Controller*
– N8103-104 SAS Controller*
– N8103-107 SCSI Controller*
* Option.
NOTES:
The driver of option card mentioned above is stored in the
EXPRESSBUILDER DVD.
If you use the board not mentioned above, the ExpressSetup will
fail. Refer to the instructions attached to the board.