Pci Configuration - NEC Express5800/120Rj-2 User Manual

4-10 Configuring Your Server

PCI Configuration

– Onboard Video Controller submenu
Option
VGA Controller
Onboard VGA
Option ROM Scan
– Onboard LAN submenu
Option
LAN Controller
LAN1 Option ROM
Scan
LAN2 Option ROM
Scan
Option
PCI Slot 1B/2B/3B
Option ROM
PCI Slot 1C/2C/3C
Option ROM
Parameter Description
Disabled If Disabled, the BIOS will hold the
[Enabled] embedded chip in reset.
[Auto] Allows selecting the onboard VGA controller
Force or optional PCI VGA controller as the
display device that will be active when the
system boots.
The "Force" option is selected to use the
onboard VGA controller if the optional PCI
VGA controller is installed in the system.
Parameter Description
Disabled If Disabled, the BIOS will hold the
[Enabled] embedded chip in reset.
Disabled If Enabled, initialize device expansion ROM.
[Enabled]
Disabled If Enabled, initialize device expansion ROM.
[Enabled]
Parameter Description
Disabled
Used to enable or disable an option ROM
[Enabled]
on a PCI board connected to the full-height
riser card.
Disabled
Used to enable or disable an option ROM
[Enabled]
on a PCI board connected to the low-profile
riser card.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set