FujiFilm FinePix F300EXR Owner's Manual page 135

Warning Warning
The DPOF print order on the current memory
DPOF FILE ERROR
card contains more than 999 images.
CAN NOT SET DPOF The picture can not be printed using DPOF.
A CAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE The picture is protected.
A CAN NOT ROTATE
Movies can not be rotated.
PRESS AND HOLD An attempt was made to choose a flash mode
THE DISP BUTTON TO or adjust the volume with the camera in silent
DEACTIVATE SILENT MODE mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer or
other device.
PRINTER ERROR
Printer out of paper or ink, or other printer
error.
PRINTER ERROR
RESUME?
An attempt was made to print a movie, a
picture not created with the camera, or a
CAN NOT BE PRINTED
picture in a format not supported by the
printer.
Description Description
Warning Messages and Displays
Solution Solution
Copy the pictures to internal memory and create a
new print order.
—
—
Remove protection before rotating pictures (pg. 89).
—
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on and that the USB
cable is connected.
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If
printing does not resume automatically, press MENU/OK
to resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confirm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
121