Table of Contents
Advertisement
DVD
Special Playback Features
2
GB
1
3
3
OK
5
50
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the
❿
ll (Play/Still) button.
1
Still
❿
Press the
ll (Play/Still) button on the remote control during
playback.
• The picture will still and the audio will mute.
❿
• To resume playback, press the
ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP button on the
remote control to advance one frame at a time.
• Audio is muted during Frame Advance mode.
❿
• Press
ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (❿ ❿l / l➛➛) buttons on the remote control or front
panel to jump forward and backward through disc
chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current
chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(❿ ❿ /➛➛) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X
❿
speed. Press
ll (Play/Still) button to resume normal speed.
4
Slow Motion
❿
During playback, press the
ll (Play/Still) button to Still the
image. Then use the Search Forward (❿ ❿ ) to play in slow motion
at variable speeds.
• Each press increases the slow motion speed playback to 1/8,
1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the
(Play/Still) button.
• Press the I (Stop) button twice to completely stop playback.
❿
The next time you press
ll (Play/Still), the disc will start over
from the beginning.
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
1
Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen setting in the initial DVD menu.
• To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the
initial setup (See page 47).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the screen will disappear. The picture will look
vertically stretched. (Depending on the type of disc, the black bars may not disappear completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
❿
ll
DVD
GB
51
Advertisement
Table of Contents
